Tire Weld (Extra Large)

4978955007640

B005UTFX1W

MH764

Holts Tire Weld - 1800cc-3500cc - MH764 Product Description: A safe and reliable product. Holts Tire Weld allows you to safely, easily, and instantly repair punctures. Features: Holts Tire Weld instantly inflates the tire, sealing the hole and repairing the puncture using gas and liquid rubber. Precautions for Use: *Precautions before use: - Do not use on vehicles weighing over 2 tons. - Not effective on holes other than the tire contact surface, sidewalls, large holes (approximately 3mm in diameter), cracks, torn tubes, or tire/wheel connections that are disengaged. - Tires that have lost elasticity due to wear or deterioration, or tires with extremely low profile, may not be fully effective. *Please note that repairs may not be possible depending on the condition of the puncture, such as internal tears. - This product is a single-use product; any remaining fluid cannot be reused.・If the tire does not inflate, do not drive and replace the tire immediately.
Safety Warning
・Never work indoors or in places where there is open flame or sparks. ・Store in a cool, dark place away from direct sunlight. ・Do not inhale or ingest. ・Do not use on the human body. Do not use for any other purpose. ・If it comes into contact with skin, wash it off thoroughly with soap. ・Keep out of reach of children. ◎Beware of fire and high temperatures This is a flammable product that uses high-pressure gas and is dangerous, so please observe the following precautions. 1. Do not use near flames or open flames. 2. Do not use in large quantities indoors where open flames are used. 3. Do not store in places where the temperature exceeds 40°C, such as in direct sunlight or near open flames, as there is a risk of explosion if exposed to high temperatures. 4. Do not put into fire. 5. Dispose of after use. High-Pressure Gas: LPG. Caution (Disclaimer) > Please Read. - Brand Name: Holts. This tire repair agent inflates and repairs punctures without the need for a jack. It uses gas and liquid rubber to inflate the tire and repair punctures. It won't damage the tire or wheel. Easily repair punctures without changing the tire. *Not for use on vehicles weighing over 2 tons. It is not effective on holes other than the tire contact surface, on the sidewall, large holes (approximately 3mm in diameter), cracks, torn tubes, or tire/wheel connections that are disengaged. It may not be fully effective when used on tires that have lost elasticity due to wear or deterioration, or on extremely low-profile tires. *Please note that repairs may not be possible depending on the condition of the puncture, such as internal tears. This product is a single-use product; any remaining fluid cannot be reused. If the tire does not inflate, stop driving and immediately replace the tire. No jacking is required. Air is added at the same time. (Air is vaporized liquid gas.) 1. Remove any items that may be causing the puncture and completely deflate the tire. 2. Clean any dirt from the valve and move the valve to the top of the tire. 3. Shake the product well and insert the nozzle into the tire valve. 4. Remove the safety stopper and turn the knob clockwise approximately 70 degrees. 5. Once the tire has fully inflated, return the knob and remove the nozzle from the valve. 6. Immediately drive 5 to 10 km at a safe, low speed. *Please be sure to read the instruction manual inside before use. It contains detailed instructions. 4978955007640 Tire Weld (Extra Large) (text created at , 2025-05-12)

63x61x253 mm

450 g