AP Heat Gun HG822 | Heat Drying Repair Heat Treatment DIY Home Improvement Peeling Hot Air Gun Shrink Craft Seal Removal Sticker Putty Vertical Placement High Temperature Warm Air Hot Air Heater Gun
JAN
2005000008221
ASIN
B08H4VCXDQ
Maker
Model No.
2005000008221
Color
Size
Description
Astro Products - AP-AC100V - Heat Gun - HG822
■Product Description: This heat gun allows you to adjust the discharge temperature and airflow to suit your needs. The temperature adjustment dial has 9 settings, and the airflow switch has 2 settings. When the airflow switch is set to "- (Lo)," each notch on the dial increases the temperature by approximately 50°C over a range of 50-450°C. When the airflow switch is set to "= (Hi)," each notch on the dial increases the temperature by approximately 60°C over a range of 50-600°C. Each setting can be adjusted in 9 steps. [Major Uses] Removing stickers, labels, and seals Shrinking heat-shrink tubing and shrink film Bending PVC pipes Drying paint and putty, etc. Product Specifications: Dimensions: L260 x H210 x W86mm Weight: 810g Power Supply: AC100V~50/60Hz Power Consumption: 1200W Rated Usage Time: 20 minutes Flow Rate Switch: 2 levels Discharge temperature adjustment: 1-9 (stepless)
・Discharge temperature [-(Lo)/=(Hi)]: 50-450/60-600°C
・Discharge flow rate [-(Lo)/=(Hi)]: 250/500 L/min
・Time to reach set temperature: Approximately 2 minutes
・Power cord length: Approximately 2 m
・Material: PA (main body)
■Caution:
※Before use, be sure to read the instruction manual carefully and fully understand how to use this product.
※This product does not have a cooling function.
※The outlet and nozzle become extremely hot. Do not touch them during use, and do not touch them until they have cooled down after use.
※High-temperature hot air is blown out of the outlet. Never bring your face, hands, or fingers near the outlet during use.
※Never use as a hair dryer.
※Do not use on people or animals. *Do not use near highly flammable materials such as paper or wood, or expose directly to hot air. Also, do not place near these materials immediately after use. *The rated operating time is approximately 20 minutes. Do not use for more than 20 minutes. Before using again, allow the heater to cool sufficiently. *The adhesive, oil, and grease contained in the insulation inside this product may evaporate during initial use, causing smoke. After opening, set the switch to Hi (=) and heat for approximately 3-4 minutes until smoke stops. *Do not use with any power source other than AC 100V. Brand Name: Astro Products. Related Products: Electric, Hydraulic, and Pneumatic Tools, Small Processing Machines, Electric Heating Appliances, and Thermal Processing Machines. Manufacturer: World Tool Co., Ltd. // Adjust the discharge temperature and airflow volume to suit your needs. // Temperature can be adjusted in 9 levels, and the airflow volume can be switched between 2 levels. When the airflow switch is set to "- (Lo)", the temperature can be adjusted in 9 steps from 50 to 450 degrees, with each notch on the dial increasing by approximately 50 degrees. When the airflow switch is set to "= (Hi)", the temperature can be adjusted in 9 steps from 50 to 600 degrees, with each notch on the dial increasing by approximately 60 degrees. // For removing stickers and labels, shrinking heat-shrink tubing, bending PVC pipes, and drying paint and putty. // Product Name: Astro Products AP Heat Gun HG822 // Product Number: 2005000008221 // Body Dimensions (mm): L260 x H210 x W86 // Weight (g): 810 // Power Supply (V): AC100V-50/60Hz // Power Consumption: 1200W // Rated Usage Time: 20 minutes // Flow Rate Switch: 2 Levels // Temperature Adjustment: 1-9 (Stepless) // Temperature Adjustment [-(Lo)/=(Hi)]: 50-450/60-600°C // Flow Rate [-(Lo)/=(Hi)]: 250/500L/min // Time to Reach Set Temperature (m): Approximately 2 minutes // Power Cord Length: Approximately 2 // Body: PA // Weight: 1.15kg // JAN Code: 2005000008221 // 2005000008221 AP Heat Gun HG822 | Heat Drying Repair, Heat Treatment, DIY, Home Improvement, Peeling, Hot Air Gun, Shrinkage, Crafts, Sticker Removal, Putty, Vertical Placement, High Temperature, Hot Air, Heater Gun (text created at , 2025-06-30)
■Product Description: This heat gun allows you to adjust the discharge temperature and airflow to suit your needs. The temperature adjustment dial has 9 settings, and the airflow switch has 2 settings. When the airflow switch is set to "- (Lo)," each notch on the dial increases the temperature by approximately 50°C over a range of 50-450°C. When the airflow switch is set to "= (Hi)," each notch on the dial increases the temperature by approximately 60°C over a range of 50-600°C. Each setting can be adjusted in 9 steps. [Major Uses] Removing stickers, labels, and seals Shrinking heat-shrink tubing and shrink film Bending PVC pipes Drying paint and putty, etc. Product Specifications: Dimensions: L260 x H210 x W86mm Weight: 810g Power Supply: AC100V~50/60Hz Power Consumption: 1200W Rated Usage Time: 20 minutes Flow Rate Switch: 2 levels Discharge temperature adjustment: 1-9 (stepless)
・Discharge temperature [-(Lo)/=(Hi)]: 50-450/60-600°C
・Discharge flow rate [-(Lo)/=(Hi)]: 250/500 L/min
・Time to reach set temperature: Approximately 2 minutes
・Power cord length: Approximately 2 m
・Material: PA (main body)
■Caution:
※Before use, be sure to read the instruction manual carefully and fully understand how to use this product.
※This product does not have a cooling function.
※The outlet and nozzle become extremely hot. Do not touch them during use, and do not touch them until they have cooled down after use.
※High-temperature hot air is blown out of the outlet. Never bring your face, hands, or fingers near the outlet during use.
※Never use as a hair dryer.
※Do not use on people or animals. *Do not use near highly flammable materials such as paper or wood, or expose directly to hot air. Also, do not place near these materials immediately after use. *The rated operating time is approximately 20 minutes. Do not use for more than 20 minutes. Before using again, allow the heater to cool sufficiently. *The adhesive, oil, and grease contained in the insulation inside this product may evaporate during initial use, causing smoke. After opening, set the switch to Hi (=) and heat for approximately 3-4 minutes until smoke stops. *Do not use with any power source other than AC 100V. Brand Name: Astro Products. Related Products: Electric, Hydraulic, and Pneumatic Tools, Small Processing Machines, Electric Heating Appliances, and Thermal Processing Machines. Manufacturer: World Tool Co., Ltd. // Adjust the discharge temperature and airflow volume to suit your needs. // Temperature can be adjusted in 9 levels, and the airflow volume can be switched between 2 levels. When the airflow switch is set to "- (Lo)", the temperature can be adjusted in 9 steps from 50 to 450 degrees, with each notch on the dial increasing by approximately 50 degrees. When the airflow switch is set to "= (Hi)", the temperature can be adjusted in 9 steps from 50 to 600 degrees, with each notch on the dial increasing by approximately 60 degrees. // For removing stickers and labels, shrinking heat-shrink tubing, bending PVC pipes, and drying paint and putty. // Product Name: Astro Products AP Heat Gun HG822 // Product Number: 2005000008221 // Body Dimensions (mm): L260 x H210 x W86 // Weight (g): 810 // Power Supply (V): AC100V-50/60Hz // Power Consumption: 1200W // Rated Usage Time: 20 minutes // Flow Rate Switch: 2 Levels // Temperature Adjustment: 1-9 (Stepless) // Temperature Adjustment [-(Lo)/=(Hi)]: 50-450/60-600°C // Flow Rate [-(Lo)/=(Hi)]: 250/500L/min // Time to Reach Set Temperature (m): Approximately 2 minutes // Power Cord Length: Approximately 2 // Body: PA // Weight: 1.15kg // JAN Code: 2005000008221 // 2005000008221 AP Heat Gun HG822 | Heat Drying Repair, Heat Treatment, DIY, Home Improvement, Peeling, Hot Air Gun, Shrinkage, Crafts, Sticker Removal, Putty, Vertical Placement, High Temperature, Hot Air, Heater Gun (text created at , 2025-06-30)
Package
Size (Approx.):
Size (Approx.):
- mm
Package
Weight (Approx.):
Weight (Approx.):
- g
7,549 JPY (Including Tax)
Stock :
50
Scheduled Shipping:
2026-07-15
Quantity :
Reference Price from Other Stores
