Toyo Aluminum Super Filter 30cm 6-Pack 30cm x 36cm Filtan Fits most models 60cm~90cm Metal Filter Size Easy Installation S5515

4901987255154

B0DX144VPR

71010-001

Simply stick this Super Filter onto most range hoods (30cm-30cm x 36cm-60cm-90cm) - Metal Filter Size - S5515. This product is designed to prevent grease buildup in your range hood. This adhesive filter is easy to install, like a sticker. It features a thick, highly oil-absorbing filter that effectively prevents grease buildup and ensures long-lasting use. The approximately 36cm x 30cm filter can be attached to each individual metal filter. When the filter becomes dirty, a replacement notification indicator appears, letting you know when it's time to replace it. (This indicator may not appear depending on the model or usage.) The following are examples of typical models: Deep Boot Type 60cm Wide: Uses 2 Filters; Deep Boot Type 75cm Wide: Uses 2-3 Filters*1; Deep Boot Type 90cm Wide: Uses 3 Filters; Straightener Plate Type: Yes Please attach it to the metal filter inside. *2, *3, *4
Shallow Type ×
V-Catch Type 60-90cm Width ○ Use multiple pieces of this product
Exhaust Port Center Type 60-90cm Width ○ Use multiple pieces of this product
*Install filters so that they do not overlap.
*Depending on the material and condition of the metal filter, adhesion may be poor or installation may not be possible.
*After installation, trim any excess filter material with scissors.
*Do not use with unpainted aluminum or metal filters with a fluorine-coated or oil-repellent coating.
*1For metal filters with a width of 30cm or more, use three filters.
*2For types with a rectifier plate, refer to the width of the deep boot type and use in the same way.
*3Cannot be installed on types without a metal filter.
*4Do not attach to the outside of the rectifier plate.

Please refer to the diagram below for proper installation (Check before installation.)
▪️Wipe the metal filter thoroughly to remove any oil stains, water, or detergent residue after cleaning. This may cause the filter to peel off. In that case, clean the metal filter before installing it. Apply cellophane tape to the frame of the metal filter and hold it down with your fingers until it moves up, down, left, or right. Installation is complete.
▪️ If the kitchen temperature is low, the filter may not adhere well. In this case, warm the kitchen and install the filter by firmly pressing the adhesive part. Use one filter per metal filter. 1. Peel off the transparent film. 2. Insert the filter into the knob of the metal filter and attach it from bottom to top. *If it is difficult to insert, make a slit in the knob with scissors before attaching. 3. Repeat with the remaining metal filters. Replacement Guidelines: It is time to replace the filter when the replacement indicator is clearly visible. If the replacement indicator fades, it may be adversely affecting the performance of the range hood.
▪️ When replacing the filter, please check the following two points: 1. The range hood fan is completely stopped. 2. The stove flame is off.
▪️ Do not use in places exposed to direct flame.
▪️Do not use this product when cooking with alcoholic beverages such as brandy, sake, or mirin, which may cause high flames. Doing so may result in punctures or ignition of oil droplets adhering to the filter.
▪️According to the Fire Prevention Ordinance, this product must be used at least 1 meter away from gas stoves and other cooking appliances. Do not use at a closer distance.
▪️This product is for general household use. Do not use in commercial applications where the product will be used for extended periods.
▪️Some range hoods cannot be installed due to their shape. Forcing an installation may significantly impair safety or the range hood's performance, so please read the package instructions carefully before use.
▪️If the replacement notification indicator appears, replace the filter as soon as possible. Using a dirty filter may clog, reducing ventilation capacity and negatively affecting the performance of the range hood itself.
▪️Even if the replacement notification indicator does not appear, replace the filter approximately every month. Long-term use may leave residual glue.
▪️In rare cases, glue residue may remain when removing the filter. In that case, soak it in warm water, then immediately wipe it off with a mild detergent. If disposing of it as garbage, please follow the local municipal classification. Do not use for any other purpose. Brand: Toyo Aluminum Ekco Products. Material: Polyester, approximately 30cm x 36cm, flame-retardant non-woven fabric. Simply apply this thick exhaust fan filter to kitchen exhaust fans with rectifier plates to prevent greasy stains from building up on the entire intake. Simply replace it when it gets dirty to keep your range hood clean. It covers the entire intake of the exhaust fan, preventing grease from getting inside and also preventing stains on the range hood. Furthermore, the thick exhaust fan filter has high oil absorption, effectively preventing grease stains. Its adhesive backing makes it long-lasting, so installation is simple and clean, just like a sticker. The filter has perforations, making it easy to adjust the size. When the filter gets dirty, a replacement notification appears, making it easy to see when it's time to replace it. Under the motto "I'm glad I stuck it on. A clean life," these filters protect your home from troublesome stains and make cleaning much easier. They are available as preventative cleaning items for kitchen exhaust fans, toilet, dressing room, and bathroom exhaust fans, room vents, and dust-preventing filters for home appliances. 4901987255154 Toyo Aluminum Super Filter 30cm, Easy-to-Apply, Pack of 6, 30cm x 36cm, Compatible with most 60cm-90cm models, Metal Filter Size, Easy Installation, S5515 (text created at , 2025-05-13)

201x37x334 mm

90 g