Sanwa Supply PoE Extender Dustproof and Waterproof Compatible LAN-EXPOE4
JAN
4969887773741
ASIN
B0FSJJ827N
Maker
Model No.
LAN-EXPOE4
Color
Size
Description
Sanwa Supply LAN EXPOE4 PoE Extender (Dustproof/Waterproof)
▪️This PoE extender supports IEEE 802.3bt (90W)/at (30W)/af (15.4W) PoE reception, extending power and communication to PoE devices (IEEE 802.3at/af) up to 100m.\
*Theoretical value based on LAN cable specifications. \
*PoE power output through this device decreases due to power loss over the LAN cable and power consumption by the device itself.\
*The maximum number of devices that can be extended may vary depending on the specifications of the PoE-supplying device and the cable length, as the supplied power differs accordingly. \
*The PoE-supplying device must support IEEE 802.3af/at/bt, and the powered PoE device must support IEEE 802.3at/af.\
*If the PoE-supplying device is IEEE 802.3af, PoE power output from this product is not supported. (Power will be supplied, but voltage and power compliant with PoE standards will not be output.)\
※Use Category 5e/6/6a straight LAN cables with a gauge of 24AWG or thicker for PoE power delivery. Using LAN cables with a gauge of 24AWG or thinner may compromise waterproof performance.\
※Use LAN cables with a connector diameter of 13mm or less. Cables with connectors larger than 13mm cannot pass through the waterproof cap.\
※If the LAN connector has a latch cover, cut it off before use.\
▪️By receiving IEEE802.3bt PoE (up to 90W), this product can supply IEEE802.3at (30W) and af (15.4W) PoE. \
※The PoE supplying device must support IEEE 802.3af/at/bt, and the receiving PoE device must support IEEE 802.3at/af.\
※If the PoE supplying device is IEEE 802.3af, PoE power output from this product is not supported. (Power is supplied, but voltage and power output do not comply with PoE standards.)\
▪️ This industrial PoE extender supports the IP67 dustproof and waterproof rating, enabling outdoor transmission and extension of PoE signals.\
▪️ It operates within a temperature range of -10°C to 50°C, functioning in a wide variety of environments.\
▪️ The unit operates on PoE power, eliminating the need for power cables during relaying/extension. \
▪️ By cascading up to 6 units, LAN cable length can be extended up to approximately 700m (1000Mbps).\
※ Power loss over the LAN cable and power consumption by the extender itself reduce the PoE power supplied when passing through this unit.\
※ Maximum extendable device count may vary due to differences in PoE supplier specifications and cable length affecting power supply. \
※The PoE-supplying device must support IEEE802.3af/at/bt, and the powered PoE device must support IEEE802.3at/af.\
※If the PoE-supplying device is IEEE802.3af, PoE power output from this product is not supported.
▪️This PoE extender supports IEEE 802.3bt (90W)/at (30W)/af (15.4W) PoE reception, extending power and communication to PoE devices (IEEE 802.3at/af) up to 100m.\
*Theoretical value based on LAN cable specifications. \
*PoE power output through this device decreases due to power loss over the LAN cable and power consumption by the device itself.\
*The maximum number of devices that can be extended may vary depending on the specifications of the PoE-supplying device and the cable length, as the supplied power differs accordingly. \
*The PoE-supplying device must support IEEE 802.3af/at/bt, and the powered PoE device must support IEEE 802.3at/af.\
*If the PoE-supplying device is IEEE 802.3af, PoE power output from this product is not supported. (Power will be supplied, but voltage and power compliant with PoE standards will not be output.)\
※Use Category 5e/6/6a straight LAN cables with a gauge of 24AWG or thicker for PoE power delivery. Using LAN cables with a gauge of 24AWG or thinner may compromise waterproof performance.\
※Use LAN cables with a connector diameter of 13mm or less. Cables with connectors larger than 13mm cannot pass through the waterproof cap.\
※If the LAN connector has a latch cover, cut it off before use.\
▪️By receiving IEEE802.3bt PoE (up to 90W), this product can supply IEEE802.3at (30W) and af (15.4W) PoE. \
※The PoE supplying device must support IEEE 802.3af/at/bt, and the receiving PoE device must support IEEE 802.3at/af.\
※If the PoE supplying device is IEEE 802.3af, PoE power output from this product is not supported. (Power is supplied, but voltage and power output do not comply with PoE standards.)\
▪️ This industrial PoE extender supports the IP67 dustproof and waterproof rating, enabling outdoor transmission and extension of PoE signals.\
▪️ It operates within a temperature range of -10°C to 50°C, functioning in a wide variety of environments.\
▪️ The unit operates on PoE power, eliminating the need for power cables during relaying/extension. \
▪️ By cascading up to 6 units, LAN cable length can be extended up to approximately 700m (1000Mbps).\
※ Power loss over the LAN cable and power consumption by the extender itself reduce the PoE power supplied when passing through this unit.\
※ Maximum extendable device count may vary due to differences in PoE supplier specifications and cable length affecting power supply. \
※The PoE-supplying device must support IEEE802.3af/at/bt, and the powered PoE device must support IEEE802.3at/af.\
※If the PoE-supplying device is IEEE802.3af, PoE power output from this product is not supported.
Package
Size (Approx.):
Size (Approx.):
72x72x220 mm
Package
Weight (Approx.):
Weight (Approx.):
152 g
18,906 JPY (Including Tax)
Stock :
5
Scheduled Shipping:
2026-07-22
Quantity :
Reference Price from Other Stores
