GSI Creos Mr. Color German Gray 3/4 Matte 10ml Model Paint C40

4973028716382

B0BXP1HZH9

GSI Creos Mr. Color German Gray 4 Matte C40 Product Introduction: GSI Creos "Mr. Color German Gray 3/4 Matte 10ml" model paint. Mr. Color has been the standard for model paints for over 40 years, earning high praise from modelers worldwide. <Product Features> - A wide range of colors is available, covering a wide range of model genres, including character and scale models (tanks, airplanes, ships). - A wide range of pigments and metallic particles are available, many of which offer better color development than water-based paints (especially metallic and blue paints). - Solvent-based paint dries quickly. - A hard, dry film results in a beautiful glossy finish. - The resin used has a thick build, providing optimal film formation. <Dilution and Number of Coats> - When painting with Mr. Color, it is necessary to dilute it appropriately with Mr. Color Thinner. Mr. Color Thinner can also be used to clean brushes and airbrushes used with Mr. Color. Compared to water-based paints, the viscosity of the paint is higher. If brush application is difficult, add Mr. Color Thinner. (As a guideline, paint:thinner = approximately 1:1). Adding a few drops of the dedicated Mr. Retarder Mild will slow the drying speed and reduce uneven brush strokes. When airbrushing, dilute the paint according to its viscosity, aiming for a ratio of 1 part paint to 2 parts thinner. When using an airbrush, do not apply it all at once. Instead, apply a light coat over the entire area the first time, then apply two or three thin coats. <How to adjust from gloss to semi-gloss/matte> Gloss-based Mr. Colors can be adjusted to the desired gloss level using C30 Flat Base. For a semi-gloss finish, mix 5-10% Flat Base into the paint. For a matte finish, mix 10-20% Flat Base into the paint. By adjusting the flat base ratio, you can achieve various gloss levels. Caution: This paint contains organic solvents. Ensure good ventilation during and after use. Cannot be mixed with other model paints other than Mr. Color and Mr. Color GX. *When applying to ABS resin parts, the paint may penetrate the resin, causing the parts to become brittle and crack. Carefully read the assembly instructions and part runner labels, and avoid painting ABS resin parts. Capacity: 10ml Safety Warning: Not applicable Safety Warning: This paint contains organic solvents. Ensure good ventilation during and after use. Cannot be mixed with other model paints other than Mr. Color and Mr. Color GX. *When applying to ABS resin parts, the paint may penetrate the resin, causing the parts to become brittle and crack. Carefully read the assembly instructions and part runner labels, and avoid painting ABS resin parts. Brand: GSI Creos. Unisex. Material: Paint. Volume: 10ml. When painting with Mr. Color, thin it with Mr. Color thinner as needed. For airbrush painting, dilute it to a ratio of 1 part paint to 2 parts thinner depending on the paint's viscosity. Do not mix with other model paints other than Mr. Color and Mr. Color GX. When painting ABS resin parts, the paint may penetrate the resin, making the parts brittle and potentially cracking. 4973028716382 GSI Creos Mr. Color German Gray 3/4 Matte 10ml Model Paint C40 (text created at , 2025-06-30)

32x32x42 mm

50 g