GSI Creos Mr. Color Super Clear Greatone Matte 10ml Model Paint C183
JAN
4973028717266
ASIN
B0BYN6FJXX
Maker
Model No.
Color
Size
Description
GSI Creos - Mr. Color - Super Clear - Gray Tone - C183
Product Introduction
GSI Creos “Mr. Color Super Clear Gray Tone Matte Finish 10ml” is a model paint. Mr. Color has been the standard in model paints for over 40 years since its release. It is highly regarded by modelers worldwide. 【 Product Features 】 ・Offers a wide range of colors, suitable for painting numerous model genres including characters, scale models (tanks, aircraft, ships), etc. ・Can utilize a broad spectrum of pigments and metallic particles, often providing better color development than water-based paints (especially metallic and blue-based paints). ・Being a solvent-based paint, it dries quickly. ・The dried paint film is hard, achieving a beautiful glossy finish. ・The resin used provides a substantial feel (thickness) and forms an optimal paint film. 【 Dilution and Coating Layers 】 ・When painting with Mr. Color, it must be thinned appropriately using Mr. Color Thinner. Mr. Color Thinner can also be used to clean brushes and airbrushes used with Mr. Color. ・Compared to water-based paints, the viscosity is higher. If brush application is difficult, add Mr. Color Thinner. (Guideline: Paint : Thinner = 1 : up to 1) Additionally, mixing a few drops of the dedicated Mr. Retarder Mild reduces drying speed and minimizes brush streaks. ・For airbrush painting, dilute the paint according to its viscosity, using a ratio of approximately 1 part paint to 2 parts thinner maximum. When using an airbrush, do not apply all at once. Limit the first pass to a light overall coat, then apply thin layers in two or three separate passes. 【 Adjusting from Gloss to Semi-Gloss/Matte 】 ・For gloss-type Mr. Color paints, adjust gloss level using C30 Flat Base. For a semi-gloss finish, mix in 5~10% Flat Base by volume. ・Mixing in 10~20% Flat Base by volume will produce a matte finish. Adjusting the Flat Base ratio allows for various gloss levels. Caution: ・This paint contains organic solvents. Ensure adequate ventilation during and after use. ・Do not mix with other model paints besides Mr. Color or Mr. Color GX. ※When applied to ABS resin parts, the paint may penetrate the resin, causing the part to become brittle and potentially crack. Carefully check assembly instructions and part runner markings; avoid painting “ABS resin parts”. Capacity: 10ml Safety Warning No open flames
Safety Warning
No open flames
Brand Name: GSI Creos
Capacity: 10ml
When painting with Mr. Color, it is necessary to dilute appropriately with Mr. Color thinner.
For airbrush application, dilute the paint to a viscosity suitable for spraying, using a ratio of approximately 1 part paint to 2 parts thinner maximum.
Do not mix with any other model paints besides Mr. Color or Mr. Color GX.
Painting ABS resin parts may cause the paint to penetrate the resin, making the parts brittle and prone to cracking or breaking.
4973028717266
GSI Creos Mr.Color Super Clear Greatone Matte 10ml Model Paint C183
(text created at , 2025-05-10)
Product Introduction
GSI Creos “Mr. Color Super Clear Gray Tone Matte Finish 10ml” is a model paint. Mr. Color has been the standard in model paints for over 40 years since its release. It is highly regarded by modelers worldwide. 【 Product Features 】 ・Offers a wide range of colors, suitable for painting numerous model genres including characters, scale models (tanks, aircraft, ships), etc. ・Can utilize a broad spectrum of pigments and metallic particles, often providing better color development than water-based paints (especially metallic and blue-based paints). ・Being a solvent-based paint, it dries quickly. ・The dried paint film is hard, achieving a beautiful glossy finish. ・The resin used provides a substantial feel (thickness) and forms an optimal paint film. 【 Dilution and Coating Layers 】 ・When painting with Mr. Color, it must be thinned appropriately using Mr. Color Thinner. Mr. Color Thinner can also be used to clean brushes and airbrushes used with Mr. Color. ・Compared to water-based paints, the viscosity is higher. If brush application is difficult, add Mr. Color Thinner. (Guideline: Paint : Thinner = 1 : up to 1) Additionally, mixing a few drops of the dedicated Mr. Retarder Mild reduces drying speed and minimizes brush streaks. ・For airbrush painting, dilute the paint according to its viscosity, using a ratio of approximately 1 part paint to 2 parts thinner maximum. When using an airbrush, do not apply all at once. Limit the first pass to a light overall coat, then apply thin layers in two or three separate passes. 【 Adjusting from Gloss to Semi-Gloss/Matte 】 ・For gloss-type Mr. Color paints, adjust gloss level using C30 Flat Base. For a semi-gloss finish, mix in 5~10% Flat Base by volume. ・Mixing in 10~20% Flat Base by volume will produce a matte finish. Adjusting the Flat Base ratio allows for various gloss levels. Caution: ・This paint contains organic solvents. Ensure adequate ventilation during and after use. ・Do not mix with other model paints besides Mr. Color or Mr. Color GX. ※When applied to ABS resin parts, the paint may penetrate the resin, causing the part to become brittle and potentially crack. Carefully check assembly instructions and part runner markings; avoid painting “ABS resin parts”. Capacity: 10ml Safety Warning No open flames
Safety Warning
No open flames
Brand Name: GSI Creos
Capacity: 10ml
When painting with Mr. Color, it is necessary to dilute appropriately with Mr. Color thinner.
For airbrush application, dilute the paint to a viscosity suitable for spraying, using a ratio of approximately 1 part paint to 2 parts thinner maximum.
Do not mix with any other model paints besides Mr. Color or Mr. Color GX.
Painting ABS resin parts may cause the paint to penetrate the resin, making the parts brittle and prone to cracking or breaking.
4973028717266
GSI Creos Mr.Color Super Clear Greatone Matte 10ml Model Paint C183
(text created at , 2025-05-10)
Package
Size (Approx.):
Size (Approx.):
34x34x39 mm
Package
Weight (Approx.):
Weight (Approx.):
50 g
170 JPY (Including Tax)
Stock :
72
Scheduled Shipping:
2026-07-14
Quantity :
Reference Price from Other Stores
