GodHand Kami Yasu! Cutting Type Plastic Model Tool Sponge Cloth File (Adhesive-Backed) 2mm Thick #400 Yellow GH-KSC2-P400
JAN
4562349872008
ASIN
B09QHNMRRF
Maker
Model No.
GH-KSC2-P400
Color
Size
Description
GodHand-GodHand-Cutting Type-Model Kit Tool-GH-KSC2-P400
Product Introduction
Cut it to your desired shape and stick it on. The “Cutting Type” is now available for KamiYasu.
Repurpose various items as backing plates, and with a little creativity, you can create your own custom file shaped to fit whatever you want to sand.
Cut, stick, and use KamiYasu. Cutting Type
Create a GodSander. with backing plate using various items.
This is the GodSander. that you can cut and stick immediately.
It sticks powerfully, so not only dedicated backing plates like FF board, but various items can easily become backing plates.
Using a backing plate shaped to your target form, from flat surfaces to curved surfaces, makes shaping easier.
GodSander. Benefits of Using the Cutting Type on a Backing Plate
Attaching Kami Yasu. to a backing plate creates a cushioned, “non-bending” file.
This allows you to apply the file evenly across the entire surface, even on slightly undulating flat surfaces.
▽Difference from edge-sharpening files
Edge-sharpening files are good for precisely defining surfaces or standing edges, but their zero cushioning makes it hard to smoothly connect surfaces with subtle undulations.
By attaching KamiYasu. Cutting Type to a backing plate, you can smooth surfaces while retaining slight curves. Connecting consistent planes and edges creates a precise appearance where “edges seem to stand out”.
▽Difference from KamiYasu. 10mm Thickness
KamiYasu. 10mm thickness is more convenient for subtle, detailed areas. However, for “flattening surfaces,” the KamiYasu. Cutting Type attached to a backing board is easier to use. It also makes it easier to flatten surfaces near edges without distorting the edge itself.
・ Prolonged immersion in water or exposure to solvents like lacquer may dissolve the adhesive, causing it to peel off.
・Store safely out of reach of small children.
・Wear safety goggles and a dust mask during use.
・Scratches or dirt on the file surface do not affect performance.
・If adhesive residue remains after removal, use a sticker remover or IPA (isopropyl alcohol) to clean it off. \ ・Avoid applying to fragile items or forcing application, as this may cause injury or poor adhesion. Exercise caution when selecting surfaces. ・Adhesion may fail on certain materials. Test with tape first to confirm suitability before use. Safety Warning Always read the instruction manual before use.
Brand Name: GodHand
Unisex
Main Unit
Material: Foam
Introducing the “Cutting Type” for GodHand. Cut it into any shape you like and apply it immediately.
Features a strong adhesive backing, allowing you to use various objects as backing boards.
Not only for FF boards (backing boards), but also usable with power tools like pen sanders.
A highly durable sponge cloth file combining moderate flexibility and elasticity.
Country of Manufacture: Japan
4562349872008
GodHand KamiYasu. Cutting Type Plastic Model Tool Sponge Cloth File (Adhesive-Backed) 2mm Thick #400 Yellow GH-KSC2-P400
(text created at , 2025-05-13)
Product Introduction
Cut it to your desired shape and stick it on. The “Cutting Type” is now available for KamiYasu.
Repurpose various items as backing plates, and with a little creativity, you can create your own custom file shaped to fit whatever you want to sand.
Cut, stick, and use KamiYasu. Cutting Type
Create a GodSander. with backing plate using various items.
This is the GodSander. that you can cut and stick immediately.
It sticks powerfully, so not only dedicated backing plates like FF board, but various items can easily become backing plates.
Using a backing plate shaped to your target form, from flat surfaces to curved surfaces, makes shaping easier.
GodSander. Benefits of Using the Cutting Type on a Backing Plate
Attaching Kami Yasu. to a backing plate creates a cushioned, “non-bending” file.
This allows you to apply the file evenly across the entire surface, even on slightly undulating flat surfaces.
▽Difference from edge-sharpening files
Edge-sharpening files are good for precisely defining surfaces or standing edges, but their zero cushioning makes it hard to smoothly connect surfaces with subtle undulations.
By attaching KamiYasu. Cutting Type to a backing plate, you can smooth surfaces while retaining slight curves. Connecting consistent planes and edges creates a precise appearance where “edges seem to stand out”.
▽Difference from KamiYasu. 10mm Thickness
KamiYasu. 10mm thickness is more convenient for subtle, detailed areas. However, for “flattening surfaces,” the KamiYasu. Cutting Type attached to a backing board is easier to use. It also makes it easier to flatten surfaces near edges without distorting the edge itself.
・Store safely out of reach of small children.
・Wear safety goggles and a dust mask during use.
・Scratches or dirt on the file surface do not affect performance.
・If adhesive residue remains after removal, use a sticker remover or IPA (isopropyl alcohol) to clean it off. \ ・Avoid applying to fragile items or forcing application, as this may cause injury or poor adhesion. Exercise caution when selecting surfaces. ・Adhesion may fail on certain materials. Test with tape first to confirm suitability before use. Safety Warning Always read the instruction manual before use.
Brand Name: GodHand
Unisex
Main Unit
Material: Foam
Introducing the “Cutting Type” for GodHand. Cut it into any shape you like and apply it immediately.
Features a strong adhesive backing, allowing you to use various objects as backing boards.
Not only for FF boards (backing boards), but also usable with power tools like pen sanders.
A highly durable sponge cloth file combining moderate flexibility and elasticity.
Country of Manufacture: Japan
4562349872008
GodHand KamiYasu. Cutting Type Plastic Model Tool Sponge Cloth File (Adhesive-Backed) 2mm Thick #400 Yellow GH-KSC2-P400
(text created at , 2025-05-13)
Package
Size (Approx.):
Size (Approx.):
120x3x200 mm
Package
Weight (Approx.):
Weight (Approx.):
20 g
626 JPY (Including Tax)
Stock :
9
Scheduled Shipping:
2026-04-27
Quantity :
Reference Price from Other Stores
