Sanwa Supply Wireless Microphone Amplifier Speaker (Built-in Battery, Compatible with 3 Wireless Microphones) MM-SPAMP16

4969887575697

B0CSSRXW37

MM-SPAMP16

Sanwa Supply-MM-SPAMP16-Wireless Microphone Amplifier Speaker (Built-in Battery, Supports 3 Wireless Microphones)
▪️ This amplifier speaker and microphone set is easy to carry and set up for lectures, speeches, wedding receptions, events, and more.
▪️ Includes 3 wireless microphones for simultaneous use while moving freely. Adding optional wired microphones allows simultaneous use of up to 4 microphones.\
▪️ The wireless microphones can select one of 10 channels assigned to the B-band, making it easy to change frequencies if overlap occurs.\
▪️ Features a standard microphone input jack (6.3mm diameter standard jack) compatible with commercially available dynamic (wired) microphones.\

▪️ The speaker delivers high output of up to 60W, making it ideal for indoor environments covering approximately 320 to 400 square meters.\
▪️ It features a microphone mixing function, allowing music from external inputs to be output through the speaker. Use it as a karaoke speaker or play announcements alongside background music at wedding after-parties or gatherings.\
▪️Controls are conveniently located on the top panel for easy volume adjustment. It also includes a simple tablet/smartphone stand.\
▪️Features an external audio output (LINE OUT), enabling recording to external devices or simultaneous amplification from multiple speakers by cascading multiple units.\
▪️Supports dual power options: standard AC power for household outlets and built-in battery operation for portability.\
▪️ The bottom of the unit features screw holes (UNC 3/8 inch) compatible with speaker stands. It can be mounted using Sanwa Supply speaker stands (e.g., MM-SPST5).\
▪️ Includes a shoulder strap for convenient portability.\
▪️ Equipped with a microphone holder on the rear panel. Allows storage and safekeeping of the microphone when not in use.\
▪️ Includes a dedicated carrying case for convenient storage, transport, and protection.\
▪️ This wireless microphone complies with the Specific Low-Power Radio Station Radio Microphone (800MHz band) standard.\
▪️ Operates in the B band, allowing selection of one channel from ten available channels.\
【 Speaker 】\


■ Practical Maximum Output: 60W\


■ Frequency Response: 65Hz to 20KHz\


■Speaker Type: Bass-reflex full-range speaker\


■Speaker Size: 6.5 inches (diameter 165mm)\


■Tweeter Size: 1.0 inch (diameter approx. 25.4mm)\


■Input Terminal: 6.3mm standard jack (for microphone) ×1\


■External Input: 3.5mm stereo mini jack ×1\


■External Output: 3.5mm stereo mini jack ×1\


■Power Supply: AC 100V-240V 50/60Hz, Built-in Battery (18.5V/4000mAh)\


■Charging Method: AC Power (100-240V)\


■Charging time: Approx. 6 hours\


■Continuous operating time: Microphone use/Approx. 10-12 hours\
Music playback/Approx. 5-6 hours\
(Battery operation, medium volume)\


■Dimensions: W322 × D162 × H386mm\


■Weight: Approx. 5.8kg\
【 Wireless Microphone 】\


■Type: Unidirectional Dynamic Microphone\


■Antenna Type: Built-in Antenna\


■Frequency Response: 806.125–809.500 MHz\


■Oscillation Method: Crystal-Controlled PLL Synthesizer\


■Modulation Format: F3E\

370x300x500 mm

9200 g