Sanwa Supply Wireless Microphone Amplifier Speaker (Built-in Battery, Compatible with One Wireless Microphone) MM-SPAMP17

4969887575857

B0D8VTFNLS

MM-SPAMP17

Sanwa Supply-Sanwa-Supply-MM-SPAMP17-Built-in Battery・Compatible with One Wireless Microphone
▪️This speaker and microphone set is easy to carry and set up for lectures, speeches, wedding receptions, events, and more.\
▪️Includes one wireless microphone, allowing you to move freely while amplifying your voice. Adding optional wired microphones allows simultaneous use of up to two microphones.\
▪️ The wireless microphone selects one of 10 channels assigned to the B band, enabling easy frequency changes if overlap occurs.\
▪️ Features a standard microphone input jack (6.3mm diameter standard jack) compatible with commercially available dynamic (wired) microphones.\

▪️ The speaker delivers high output of up to 36W, making it ideal for indoor environments covering approximately 160 to 180 square meters.\
▪️ It features a microphone mixing function, allowing music from external inputs to be output through the speaker.\
It can be used as a karaoke speaker or for announcements with background music at wedding after-parties, parties, and similar events.\
▪️ Controls for volume adjustment and other functions are conveniently located on the top panel.\
▪️It also includes an external audio output (LINE OUT), enabling recording to external devices or simultaneous amplification output from multiple speakers by cascading multiple units.\
▪️Power is supplied via a standard household AC power source or the built-in battery for portable use, offering dual-power operation.\
▪️ The bottom of the unit has a screw hole (UNC 3/8 inch) compatible with speaker stands.\
It can be mounted using a Sanwa Supply speaker stand (MM-SPST5) or similar.\
▪️ Includes a shoulder strap for convenient carrying.\
▪️ Equipped with a microphone holder on the side of the unit for storing and securing the microphone when not in use.\
▪️ Includes a dedicated carrying case for convenient storage, transport, and protection.\
▪️ This wireless microphone complies with the Specific Low-Power Radio Station Radio Microphone (800MHz band) standard.\
▪️ Operates in the B band, allowing selection of one channel from ten available channels.\
【 Speaker 】\


■ Practical Maximum Output: 36W\


■ Frequency Response: 65Hz to 20KHz\


■Speaker Type: Bass-reflex full-range speaker\


■Speaker Size: 3.5 inches (diameter 89mm)\


■Tweeter Size: 0.75 inches (diameter approx. 19mm)\


■Input Terminal: 6.3mm standard jack (for microphone) ×1\


■External Input: 3.5mm stereo mini jack ×1\


■External Output: 3.5mm stereo mini jack ×1\


■Power Supply: AC 100V-240V 50/60Hz, Built-in Battery (1.1V/2200mAh)\


■Charging Method: AC Power (100-240V)\


■Charging time: Approx. 4 hours\


■Continuous usage time:\
Approx. 4 to 6 hours when using microphone\
Approx. 4 to 6 hours during music playback\
(Battery operation, medium volume)\


■Operating frequency band: 806.125 to 809.750 MHz\
【 Wireless Microphone 】\


■Type: Unidirectional Dynamic Microphone\


■Antenna Type: Built-in Antenna\


■Transmission Frequency: 806.125–809.750 MHz\


■Oscillation Method: Crystal-controlled PLL Synthesizer\


■Modulation: F3E\


■Tone Signal: 30kHz\


■Transmitted Power: 10mW or less\


■Transmit Frequency Stability: 10ppm or less\

267x223x379 mm

3970 g