Sanwa Supply 8K-Compatible HDMI Switch (2 Inputs/1 Output or 1 Input/2 Outputs) SW-HDR8K21BD

4969887595671

B0D222ZBBT

SW-HDR8K21BD

Sanwa Supply SW-HDR8K21BD - 8K HDMI Switch (2 Inputs/1 Output or 1 Input/2 Outputs) This bidirectional HDMI switch can switch two HDMI devices to output to one TV, or one HDMI device to output to two TVs or projectors. *No distribution output function. Supports resolutions up to 8K/60Hz and 4K/120Hz, delivering beautiful, high-definition HDMI signals. (8K/4K output: Only when the cable length between the switch and monitor is 1.5m or less.) Supports high-brightness HDR (High Dynamic Range) and HDCP 2.3. This fully manual switch operates with button operation only. Highly visible LED display lets you see which device is selected at a glance. Supports Dolby True HD and DTS HD Master Audio. Compatible with PlayStation 5. <<Notes>>
* "PlayStation," "PLAYSTATION," "PlayStation," and "PS5" are registered trademarks of Sony Interactive Entertainment Inc.
* Nintendo Switch is a trademark or registered trademark of Nintendo.
* Operation with all HDMI devices is not guaranteed.
* To output at 120Hz, 120Hz-compatible game software, cables, input devices, and output devices are required.
* When connecting at 8K/60Hz, 8K/30Hz, or 4K/120Hz, an Ultra HDMI 2.1 cable is required.
* To play 8K/HDR video, all device configurations, cables, and software must support the 8K/HDR standard.
<<About Screen Display Time When Switching Ports>> It usually takes about 3 to 5 seconds for the image to appear when switching ports. This is not a symptom of this product; it is the time it takes for the HDMI device (such as a recorder) to recognize the display and begin video output, and is dependent on the performance of the HDMI device.
This product itself completes the port switch the instant you press the switch button.

■ Interface: Input/Output: HDMI Type A (19-pin) female x 2

■ Input/Output: HDMI Type A (19-pin) male x 1

■ Switching: HDMI input 2/HDMI output 1 or HDMI input 1/HDMI output 2

■ Switching method: Main unit switching button

■ HDMI standard: HDMI Ver2.1


■HDCP: HDCP1.4, HDCP2.2, HDCP2.3


■Data Rate: 48Gbit/s (Maximum)


■Pixel Clock: 1200MHz (Maximum)


■Maximum Resolution: 8K/60Hz


■Main Supported Resolutions: 7680×4320 (60/50/30/25/24Hz, 4:4:4/4:2:0)
4096×2160 (60/50/30/25/24Hz, 4:4:4/4:2:2/4:2:0)
3840×2160 (120Hz, 4:4:4/4:2:2/4:2:0)
3840×2160 (60/50/30/25/24Hz, 4:4:4/4:2:2/4:2:0)
1920x1080p (60/50/30/24Hz)
1920x1080i (60/50/30/24Hz)
1280x720p (60/50Hz)
640x480p (60/50Hz)
*Depending on the resolution of the connected TV or monitor.


■HDR: Supported


■Supported Audio Formats: LPCM 2/5.1/7.1ch, Dolby Digital, Dolby Digital Plus,
Dolby TrueHD, DTS-HD Master Audio, DTS


■Input DDC Signal: 5V


■Device-to-Device Control (CEC): Supported
*Operation is not guaranteed with all devices.

■Cable Length: 0.5m

■Power Consumption: 0.3W (Maximum)

■Environmental Requirements: Operating Temperature: 0-50°C, Humidity 80% or Less (Non-condensing)

■Storage Temperature: -20-60°C, Humidity 80% or Less (Non-condensing)

■Signal Type: HDMI

■Number of Circuits: 2 x 1 (Bidirectional)

■Dimensions: W65 x D55.5 x H16mm

■Weight: Approx. 92g

■Set Contents: Main unit, instruction manual, warranty card Brand Name: Sanwa Supply This bidirectional HDMI switch can switch two HDMI devices to output to one TV, or one HDMI device to output to two TVs or projectors. *No distribution output function. Supports resolutions up to 8K/60Hz and 4K/120Hz, delivering beautiful, high-definition HDMI signals. (8K/4K output: Only when the cable length between the switch and monitor is 1.5m or less.) Supports high-brightness HDR (High Dynamic Range) and HDCP 2.3. This is a fully manual switch that switches with just a button. The highly visible LED display lets you see at a glance which device is selected. 4969887595671 Sanwa Supply 8K Compatible HDMI Switch (2 Inputs/1 Output or 1 Input/2 Outputs) SW-HDR8K21BD (text created at , 2025-05-12)

143x34x203 mm

160 g