NISSEN Stainless Steel Shift Outer Cable (Soft Type) (Outer Diameter: 4mm Length: 2m) [Jade Green]

4589501784856

B09KGWSF1K

23640485

NISSEN Stainless Steel Shift Outer Cable - Soft Type

Its flexibility makes installation easier. Flat wire type. The coil wire of the outer cable, typically produced in iron, has been replaced with stainless steel. It is highly rust-resistant and finished with a transparent coating, giving it a premium look. Unlike standard condensed-type shift cables (where bare wires run straight vertically), this shift cable has a spring-like (coiled) construction. Therefore, slight stroke loss may occur between the inner and outer wires during use. While efforts have been made to minimize stroke loss, please be aware when using 10-speed to 11-speed systems. It also includes a polyethylene inner liner, making the brake lever pull lighter. Enjoy easy dress-up and spec upgrades. The shift cable has an outer diameter of 4mm and can accommodate a 1.2mm inner wire.
Brand Name: NISSEN
Body Only
Material: Stainless Steel
Shift outer cable featuring rust-resistant stainless steel coil wire coated in transparent color.
Includes a polyethylene inner liner for smooth, light lever feel.
Soft type recommended for bikes with tight handling or frequent folding during transport.
Compatible with 1.2mm inner cables.

■Outer Diameter: 4mm

■Length: 2m (sufficient for approximately one road bike)

■Color: Jade
※Note: Unlike standard solid-wire shift cables (where bare wires run straight vertically), this cable has a spring-like (coiled) construction. Therefore, slight stroke loss may occur between the inner and outer cables during use. While designed to minimize this, please be aware when using 10-speed to 11-speed systems.
4589501784856
NISSEN Stainless Steel Shift Outer Cable (Soft Type) (OD: 4mm Length: 2m) [Jade]
(text created at , 2025-05-13)

187x19x279 mm

100 g